Products

LDPE

We offer a wide variety of low density polyethylene both blow molding and injection types, in many different melt flow rates and densities. We also deal with linear density polyethylene.

LDPE; Low density polyethylene prime grade, off-grade resins, reprocessed pellets (regranulates) and agglomerates

  • natural or white blow molding
  • natural injection molding
  • semi-transparent, blow molding
  • grey-black color blow molding
  • mix color blow molding
  • white color blow molding
  • blue color blow molding
  • mix color injection molding

LLDPE; Linear Low density polyethylene prime grade resins, reprocessed pellets (regranulates) and agglomerates

  • natural blow molding
  • semi-transparent, blow molding
  • mix color blow molding
  • white color blow molding

HDPE

We offer a wide variety of high density polyethylene for both injection and extrusion blow molding, in many different melt flow rates and densities.

HDPE; High density polyethylene prime grade, off-grade resins, reprocessed pellets (regranulates) and agglomerates

  • natural injection molding
  • natural pipe extrusion
  • natural blow molding for film purposes
  • semi-transparent blow molding for film purposes
  • white blow molding for film purposes
  • red, blue or mix color injection grade
  • semi-transparent, blow molding
  • grey-black color, blow molding
  • mix color, film blowing or pipe extrusion

PP

We offer a wide variety of polypropylene for both injection and blow molding, in many different melt flow rates.

PP; Polypropylene prime grade, off-grade resins, reprocessed pellets (regranulates) and agglomerates

  • natural injection molding
  • white injection molding
  • white injection molding with talc
  • natural blow molding for bottles
  • black copolymer and homopolymer

PS&ABS

We offer a wide variety of polystyrene and acrylonitrile butadiene styrene for both injection and blow molding, in many different melt flow rates.

PS; Polystyrene prime grade, off-grade resins and reprocessed pellets (regranulates)

  • natural high impact
  • white high impact
  • transparent low impact
  • reprocessed pellets white and black

ABS; Acrylonitrile butadiene styrene

  • reprocessed pellets white and black

Methanol

Among alcohols, methyl alcohol is rightfully considered the most common substance with a wide variety of applications. One of the most original variants of its use can be considered as a fuel for internal combustion engines of racing cars and motorcycles. Due to its high-octane rating, which allows a compression ratio of up to 16 and a 20% increase in the energy capacity of a charge based on methanol and air], methanol is used to fuel racing motorcycles and cars. Methanol burns in air, and when it is oxidized, carbon dioxide and water are formed. To obtain biodiesel, vegetable oil is interesterified with methanol at a temperature of 60 ° C and normal pressure approximately as follows: 1 ton of oil + 200 kg of methanol + potassium or sodium hydroxide.
In many countries, methanol is used as a denaturing additive to ethanol in the manufacture of perfumes. In organic chemistry, methanol is used as a solvent.
Methanol is used in the gas industry to combat hydrate formation (due to its low freezing point and good solubility). In organic synthesis, methanol is used to produce formaldehyde, formalin, acetic acid and a number of esters (for example, MTBE and DME), isoprene, etc. Alcohol is also used for heating systems.
We sell methanol with delivery from Ukraine. We sell wholesale and retail.  It can be purchased in cans, barrels, cube.
Packing 20l, 50l, 100l, 200l, 1t.

 

Urea

Urea is a colorless, odorless solid, highly soluble in water, and practically non-toxic (LD50 is 15 g/kg for rats). Urea is widely used in fertilizers as a source of nitrogen (N) and is an important raw material for the chemical industry. Urea is a chemical compound, diamide of carbonic acid. White crystals, soluble in polar solvents.
 
 

 

T-1500 Oil

T-1500 (ГОСТ 982-80(с изм.№1-3)ОКП 02 5376 0105) – transformer oil from low-sulfur oils of sulfuric acid and selective purification. It is used for casting transformers, oil circuit breakers and other high-voltage equipment as the main electrical insulating material. Oil T-1500 combines high insulating properties with the properties of an active cooling medium and heat carrier. In oil circuit breakers, it performs the function of an arc extinguishing medium. T-1500 oil contains an antioxidant additive ionol (2,6 ditertiary butyl paracresol), which provides the most important property of the oil – stability against oxidation, and reliably retains all its performance characteristics during long-term operation. T-1500 oil does not contain water and mechanical impurities, which ensures high dielectric strength of the oil. According to the international classification of transformer oils, T-1500 belongs to class II (for northern regions with a pour point not higher than -45 ° C).
 
 

PETROLEUM COKE AZS 274-2007

PropertiesLimits
Humidity, % mass, max12,0
Volatile materials, %mass, max11,0
Ash, %mass, max0,60
Sulphur, %mass, max1,5
Percentage of particles more than 8 mm, %mass, min45,0
Percentage of particles more than 250 mm, % massAbsence
Determination of caking power, Roga indexNot limited
The first indicator (humidity) shall not be construed as a ground for the non-conformity to the quality specification of Petroleum Product and shall be used only for the quantity calculation in net (metric tons). The mass percentage of humidity more than above limit shall be deducted from the gross weight of supplied Petroleum Product.